Paint Spray Guns
Binks AA 1500 Air Assisted Airless Spray Gun and Comet 4/12 Pump
Graco G15 Air Assisted Airless Spray Gun and Falcon, Monark, President or Merkur Pump
ITW Devilbiss Compact and Graco Air Pro HVLP Guns
Specialty Guns or Touchup Guns
Graco Contractor, Flex and XTR High Pressure Airless Spray Guns
Graco and ITW Binks and Devilbiss are worldwide leaders in the design and manufacture of paint spray guns.
There are a variety of methods used to atomize and apply liquid coatings. Liquid coatings are typically atomized by conventional air spray, HVLP, Air Assisted Airless and Airless and Electrostatic methods. Each method has advantages and disadvantages and it’s suitability is determined by a number of factors such as product geometry, appearance requirement; film thickness required, coating viscosity and cost, application speed required, the hazardous nature of the coating and environmental considerations; to name a few.
The
Binks AA 1500 Air Assisted Airless Spray Gun and
Comet 4/12 Pump is well suited for the application of sealers, paints, varnishes and topcoats particularly in the kitchen cabinet and wood furniture markets. Low overspray, excellent atomization and high production speeds make this a favorite for wood finishers.
The
Graco G15 Air Assisted Airless Spray Gun and Falcon, Monark, President or Merkur Pump are well suited for the application of sealers, paints, varnishes and topcoats particularly in the kitchen cabinet and wood furniture markets. Low overspray, excellent atomization and high production speeds make this a favorite for wood finishers.
ITW Devilbiss Compact and Graco Air Pro HVLP Guns are commonly used in the decorative finishing markets. Low overspray and high quality finishes are produced with these guns.
A wide variety of specialty guns such as touchup guns, airless guns, gravity and siphon feed guns, gun extensions, multicolor and Zolatone guns and 2 component guns are available from ITW Binks and Devilbiss and Graco to suit any manufacturing requirement.
Graco Contractor, Flex and XTR High Pressure Airless Spray Guns are well known in the protective coatings markets; coupled with NXT and Xtreme pumps; they can apply the most difficult high solids epoxies, urethanes and CARC coatings.
|